DDS39 TorqueSync Founders Edition

Voltage Makes the Difference

Industrial-grade motor control meets 350V power delivery.

The DDS TorqueSync™ combines a SPMSM / AC Brushless industrial motor, the same type found in industrial automation, with an internal 350 VDC bus that delivers massive voltage headroom. Hand-built with harmonised magnet pairs and distributed-wound stator cores, the motor virtually eliminates torque ripple and cogging. The high-voltage architecture provides the power to overcome back-EMF, maintaining torque at higher speeds and delivering significantly faster slew rates. The result is silky-smooth rotation with instant torque delivery that responds to rapid changes without lag or voltage sag.

Future-Proof Data Passthrough

Full USB connectivity designed for today's wheels and tomorrow's innovations.

The DDS TorqueSync™ features comprehensive data passthrough that works seamlessly with every steering wheel on the market. Full USB 2.0 runs directly through the base to your PC. No signal degradation, no compatibility issues, no proprietary restrictions. A dedicated 5V power line at 2,500 mA handles high-draw displays and button boxes without taxing standard USB limits. All of this flows through an industrial-grade replaceable slipring rated for 200 million cycles, ensuring reliable signal transmission for years of racing. Your wheels, your displays, your setup: connected without compromise.

Feel What Others Miss

Patented technology synchronizes simulator physics with motor output in real time.

TorqueSync™ is our patented signal translation layer that bridges the gap between simulation and servo. Running at over 100,000 updates per second, it ensures every force command from the simulator is translated to motor torque with extreme precision and minimal latency. Micro-details like tire slip, road texture, and load transitions come through cleanly, giving you authentic feedback that mirrors real-world driving dynamics.

No Brick, No Clutter

No external brick, full power delivery built into the base.

Forget bulky power bricks cluttering your rig. The DDS TorqueSync™ integrates a high-efficiency 1,500W power supply (2,500W on DDS39) directly into the housing. This eliminates cable mess, reduces failure points, and ensures the motor receives clean, stable power for consistent torque delivery. Just one mains cable, and you're ready to race.

Designed to Adapt

Universal mounting and open ecosystem. No compromises, no lock-ins.

Precision mounting rails run along all four sides of the housing, plus dedicated front-mount points for maximum rigidity. Side-mount on a Sim-Lab rig, front-mount for a custom build, or adapt it however your setup demands. The DDS fits your rig, not the other way around.

Software That Thinks Like You Do

RaceDirector™ gives you control, telemetry, and a community of setups.

RaceDirector™ isn't just configuration software: it's a complete tuning ecosystem. Adjust torque curves, damping, and slew rate with precision controls that go deeper than any competitor. Telemetry FFB mode lets you see the incoming simulator signal alongside the motor's actual output, so you can tune by data instead of guesswork. Upload your setups to share with the community or download proven profiles from the fastest drivers. Setup becomes a competitive advantage, not a mystery.

DDS39 TorqueSync™ Specifications

• Peak Torque: 39 Nm
• Encoder: 24 bits (16 mio steps)
• Power Input: 110 / 240 VAC
• Control Loop: DSP Chip 100+KHz Multithread.
• Servo Motor: SPMSM - AC Brushless (industrial type)
• Internal Power Supply: Integrated 2500W peak-rated
• Internal Servo Power Storage: 350 VDC @ 40A
• I/O: USB 3.0 + 12V
• STO: Included
• Dimensions (without QR): 420 x 130 x 130 mm (l x w x h)
• Mass: 13,5 Kg
• Cooling: Active Fan Cooling
• Software: RaceDirector™
• Mounting: Compatible with Wheeldeck / Front-Mounting and Side-Mounting solutions
• Wheel Mounting Interface: ⌀70mm x M5 bolt pattern
• Data Passthrough: USB 2.0 + 2.500 mA available on USB power line
• Power Delivery Data-Passthrough: 5V / 2.500 mA (normal USB is 500mA)
• Slipring: Industrial type, replaceable slipring (easy access through front)
  

Product Warranty

Backed by a 4-year warranty – built to perform, made to last.

Compatibility

• Sim-Lab & GRID Engineering wheels
• Third-party wheels, ⌀70 mm, M5 bolt patterns
• Data Passthrough on all wheels with USB-C / USB-A / internal connector (check Xero-Play Quick Release v2 for specific cables needed)
• Compatible with wheeldeck, side-mount, and front-mount

In The Box

• DDS TorqueSync™ Wheelbase
• Xero-Play Quick Release v2
• Hardware kit for mounting
• Premium booklet